 |  |  |  |  |  |
|---|
LITE – PRODUCTION PROGRAMME
OVERVIEW FILM PRODUCTION
LITE TK (PEEK)
semi-crystalline, thermoplastic film, high crystallinity
Properties
very good mechanical properties
highly heat resistant
excellent radiation resistance
opaque
excellent chemical and hydrolysis resistance
highly resistant to stress cracking
Typical applications
wire and cable insulation
slot insulation
membranes
adhesive tapes
bearings
electronic sensors
LITE TK mod (PEEK modified)
semi-crystalline, thermoplastic film with different fillers
Properties
increased thermal conductivity
lower thermal expansion factor
higher surface hardness
highly improved friction/abrasion properties
Typical applications
bearings
heat conductive films
wear-resistant coatings
LITE TKT (PEEK modified)
semi-crystalline, thermoplastic film with 10-30 % talcum
Properties
higher thermal conductivity
increased elastic modulus
lower surface friction
Typical applications
electrically isolating heat-conductive films
membranes
LITE K (PEEK)
semi-crystalline, thermoplastic film, low crystallinity
Properties
highly radiation resistant
very good chemical and hydrolysis resistance
low moisture absorption
thermoformable below 200°C
transparent
Typical applications
thermoformed electrical insulating parts
thermoplastic composites
LITE P (PPS)
semi-crystalline, thermoplastic film, low crystallinity
Properties
good chemical resistance
transparent
thermoformable below 150°C
good hydrolysis resistance
Typical applications
glass/carbon fiber composites
thermoformed insulating components
LITE S (PES)
amorphous thermoplastic film
Properties
good thermal stability
self-extinguishing
highly heat resistant
Typical applications
high temperature labels
thermal shielding
slot and gap insulation
pump components
electronic sensors
seals and gaskets
LITE I (PEI)
amorphous thermoplastic film
Properties
radiation resistant
good mechanical properties
self-extinguishing
low smoke density
weathering resistant
good hydrolysis resistance
Typical applications
fiber reinforced compositesfor aircraft applications
steam sterilizable thermoformed containers
electronic sensors
wire and cable insulation
LITE U (PSU)
amorphe, thermoplastische Folie
Properties
crystal clear
low moisture absorption
favourable electrical properties
transmits microwaves
Typical applications
team sterilizable packagings
microwave applications
battery housings
packaging of electronic components
membranes
